What is filler flow and sagging? How to prevent and fix it?

What is Filler Flow-Sagging? Is it dangerous? How to prevent and fix it that you should know

Post Views: 22

Filler flow or filler sagging This is a problem that many people are concerned about after filler injections, especially when using substandard fillers or injecting with people who are not experts. This symptom is caused by the filler moving to an unwanted position, causing the face to look deformed, not firm, or forming an unnatural lump. If left untreated, it can affect the beauty and confidence of the person injecting. In this article, we will take you to understand what causes filler to flow and sag, how dangerous it is, and recommend the correct prevention and solution methods to ensure the results after filler injections are beautiful and safest.

Filler flows and sags

What is filler flow and filler sagging?

Filler flow, filler droop is a condition that occurs after filler injection, where the substance injected under the skin does not stay in the injection site, but moves or relocates to another area, which is not the area that needs to be filled, such as under the eyes or cheeks, resulting in facial deformity, swelling, and disproportion.

The problem of filler flow and sagging is often caused by the use of substandard fillers, most of which are liquid silicone or paraffin fillers, which the body cannot accept and naturally decompose. When left for a long time, these substances will move, clump together, or spread to different areas, resulting in uneven facial skin and causing facial deformity.

Causes of filler flow and sagging

As you know, filler injection is a popular cosmetic technique. As a result, fake fillers are produced. Fake fillers are often made from substances that are not safe for the body, such as liquid silicone, vegetable oil, or other synthetic substances, which can cause contamination of dangerous substances or germs, which is one of the causes of filler flow.

The causes of filler flow and sagging are as follows:

  • Choosing substandard fillers For example, fake fillers made from substances that are not safe for the body, such as liquid silicone, vegetable oil, paraffin, or other synthetic substances, may cause side effects such as lumps, flowing in the wrong direction, or hard bumps at the injection site, resulting in facial deformity and uneven skin.
  • Injection by an inexperienced doctor Filler injection requires knowledge of facial structure and correct injection technique. If injected by an inexperienced doctor, without a medical license or without a medical license, the filler may pool and result in unsatisfactory results.
  • Injection in inappropriate areas Injecting filler into areas with regular muscle movement, such as the mouth or cheeks, can cause the filler to move more easily.
  • Choosing the wrong filler Currently, there are many brands of fillers. Each brand has different properties, substance density, and suitability for the problem that needs to be solved. If you choose a filler that is not suitable for the problem or the area injected, it may cause the filler to flow from the injection site and there may be a problem with the distribution of the substance.

Incorrect post-filler care After filler injection, avoid touching the injected area, such as pressing, massaging, picking, or kneading, as well as strenuous exercise, as this may cause the filler to move.

What are the symptoms of filler flow?

Filler flow symptoms can be caused by many factors, such as substandard injections, injections by inexperienced doctors, or improper care, which results in the filler flowing and pooling until it forms a lump, causing swelling, or spreading to nearby areas. In addition, inflammation or redness may occur, and these symptoms usually do not show up immediately after injection, but will take about time. 3 – 5 years It takes longer to see results because substandard fillers cannot naturally dissolve and may change shape or move from the injection site.

Is the filler flowing or sagging? Is it dangerous?

Filler flow or sagging is a condition that occurs after injecting substandard fillers, which often contain ingredients that are unsafe for the body, such as liquid silicone, vegetable oil, or other synthetic substances. In addition, injections by doctors who are not experienced in fillers, as well as improper care, can cause the filler to clump, sag, cause facial deformity, or become infected. In severe cases, fillers can cause blood vessel blockage, resulting in tissue death, which is considered dangerous if not corrected promptly.

How to prevent filler from flowing and sagging

  • The flow of filler and sagging filler will result in blockage until the tissue dies, infection occurs, filler lumps form, movement from the injection site, resulting in facial deformity and uneven facial skin. The methods to prevent filler from flowing and sagging are as follows:
  • You should choose to get vaccinated at a clinic or service center that has a clear medical facility license and 11-digit license number that can be verified.
  • You should choose to get the injection from a doctor who has a medical license or a medical license, and must have expertise in filler injections, because filler injections require knowledge of the structure of the face and must be injected correctly.
  • Fillers should be checked before injection. Standard fillers must have FDA registration numbers and Lot numbers matching in 4 places: Lot number on the tube, Lot number on the box, Lot number on the sticker, and Lot number on the envelope or tube. They must also have Thai language documentation and be able to verify the source.
  • Choose the type of filler that is appropriate for the problem, such as fillers with large molecules and high stability, so they are suitable for injection in the chin, cheeks, and temples. Fillers with a soft texture are suitable for injection under the eyes or lips, etc.
  • Avoid behaviors that cause the filler to sag, such as picking, pressing, massaging, or touching the injection site, as well as sleeping on your side, exercising heavily, and being exposed to heat, as these can cause the filler to move.
  • Avoid injecting a large amount of filler in the same location, as this will cause the filler to be unable to stabilize, move, or flow.
  • After filler injection, follow-up and self-care should be carried out. If there is any abnormality, see a doctor immediately.

How to fix flowing and sagging filler?

As you know, filler injection is the injection of filler under the skin. If injected by an inexperienced doctor or injected with fake filler, it may cause negative effects such as inflammation or infection. Therefore, if the filler flows or sags, it can be solved with the following methods.

  • Filler dissolving injections This is a safe method. The doctor will inject the enzyme hyaluronidase (HYAL) into the area under the skin at the point that needs to be corrected. The amount used must be similar to the amount of filler that was previously injected in order to react with the filler, causing it to break up into small lumps and dissolve. Hyaluronidase can break down genuine fillers of the hyaluronic acid (HA) group.
  • Filler scraping This is a method suitable for solving the problem of fake filler injections. The doctor will clean the skin in the problem area, then inject anesthesia, wait until the anesthesia takes effect, and then open the skin so that the doctor can use a tool to scrape the filler. After scraping, the doctor will apply a final antiseptic before closing the wound.
  • Surgical removal of filler This method is suitable for fillers that are large, hard, and injected for a long time until fibrosis occurs. These substances include Polymethyl Methacrylate, liquid silicone, and paraffin. The doctor will clean the skin in the problem area, then inject anesthesia, wait until the anesthesia takes effect, and then open the skin so that the doctor can use tools to peel off the filler. However, this method cannot remove all of the filler.